|
Low viscosity neat cutting fluid developed for grinding processes of all kind of metals. Due to its high cooling and cleaning effect, product is also recommended for general machinning operations of small parts. Chlorine free.
|
Viscosity ISO VG
(cSt a 40ºC) |
10
|
|
 |
|
|
| Neat cutting fluid for general machinning processes of copper and its alloys. Product is also recommended for turning and milling of mild steel. |
Viscosity ISO VG
(cSt a 40ºC) |
| 18 |
|
 |
|
|
| Neat cutting fluid for general cutting operations from low to medium severyty of mild steels, aluminium, copper and its alloys. Product is also recommended for turning and milling of alloyed steels. |
Viscosity ISO VG
(cSt a 40ºC) |
| 18 |
|
|
|
|
|
Neat cutting fluid for general machinning operations of all kind of metals. With copper inactive EP additives. Recommended for turning, milling and drilling processes.
|
Viscosity ISO VG
(cSt a 40ºC) |
| 20 |
|
|
|
|
| Neat cutting fluid recommended for processes with high load requirements and low speeds, as gear hobbing and thread rolling. High EP content, product is recommended for cast iron, steel and its alloys. Not suitable for non ferrous metals. |
Viscosity ISO VG
(cSt a 40ºC) |
| 38 |
|
|
|
|
| Neat cutting fluid for high severity operations of aluminium, steel and its alloys. With high EP content, product is recommended for inner and outer broaching with medium and high speeds, and for deep drilling operations of alloyed steels. Not suitable for copper and its alloys. |
Viscosity ISO VG
(cSt a 40ºC) |
| 20 |
|
|
|
|
| Neat cutting fluid for the most difficult operations of stainless steel. Highest EP content, product is specially recommended for deep drilling and inner broaching with highest speeds. Not at all suitable for non ferrous metals. |
Viscosity ISO VG
(cSt a 40ºC) |
| 16 |
|
|
|
|
|
Low viscosity neat cutting fluid recommended for honing operations. Also suitable for grinding. Excellent surface finishing results.
Not suitable for non ferrous metals. |
Viscosity ISO VG
(cSt a 40ºC) |
| 9 |
|
|
|
|
| Vanishing cutting fluid recommended for float glass cutting processes with medium cuting and breaking cycles. Fast drying speed after cutting. |
Viscosity ISO VG
(cSt a 40ºC) |
| 2 |
|
|
|
|
Neat cutting fluid specially developed to be used in automatic lathes with one oil tank. Product is recommended for general machining of all kinds of metals.
|
Viscosity ISO VG
(cSt a 40ºC) |
| 32 |
|
|
|
| Meets the requirement DIN 51 524 Parte 2, HLP. |
|
| Neat cutting fluid for general machinning of aluminium, copper and its alloys. Product is also recommended for turning and milling of mild steel. High cooling effect. Chlorine free, it contains anti-mist additives. |
Viscosity ISO VG
(cSt a 40ºC) |
| 18 |
|
|
|
|
| Neat cutting fluid for general machinning of all kind of metals. Chlorine free, product contains copper inactive EP agents and non-mist additives. Specially recommended for drilling and even deep drilling of alloyed steel. |
Viscosity ISO VG
(cSt a 40ºC) |
| 22 |
|
|
|
|
| High performance neat cutting fluid developed for operations with high load requirements and low speed. Chlorine free, product has high content of EP additives. It is recommended for gear hobbing, thread rolling and outer broaching processes of cast iron, steel and its alloys. Not suitable for non ferrous metals. |
Viscosity ISO VG
(cSt a 40ºC) |
| 32 |
|
|
|
|
| High performance neat cutting fluid for the most difficult operations and the toughest materials. It is recommended for deep drilling and broaching with highest speeds of stainless steel. Free of chlorine, its special additivation increases tool lifetime and improves surface finishing. Not at all sutiable for non ferrous metals. |
Viscosity ISO VG
(cSt a 40ºC) |
20
|
|
|
|
|
