INDUSTRIAL OILS

MULTIPURPOSE OILS


Product			ISO VG Viscosity (CST at 40° C)	Description and applications
	ULTRA MF	10 / 22 / 32 / 46 / 68 / 100 / 150 / 220	10 22 32 46 68 100 150 220	Oils for the lubrication of bearings, hydraulics, slideways and gears. Classification: ISO-L-HM. Meet the requirements of the standards: DIN 51524-Part 2 HLP / DIN 51517-Part 3 CLP.
	ULTRA ATOX	32 46 68 100 150 220 320 460	32 46 68 100 150 220 320 460	White oils with additives for the lubrication of bearings, hydraulics, slideways, gears, circulation systems and compressors. Meet the requirements of the standards: ISO 6743/4-HM. DIN 51524-Part 2 HLP. DIN 51517-Part 3 CLP. DIN 51506-VD-L. Certified by NSF as H1 – suitable for accidental food contact.
	ULTRASYNT ATOX	32 46 68 100 150 220 320 460 680	32 46 68 100 150 220 320 460 680	Synthetic oils for long lasting high-performance lubrication for bearings, hydraulic systems, pumps, chains, gears and compressors. These oils exceed the requirements of standards ISO 6743/4 - HM. DIN 51524 - Part 2 HLP - DIN 51517 - Part 3 CLP - DIN 51506 -VD-L. Certified by NSF as H1 – suitable for accidental food contact.
	ULTRA VBA	46 68	46 / 68	Multifunctional lubricants with Vegetable-based bases, suitable for incidental food contact (NSF H1), totally free of hydrocarbons and biodegradable. Specials as hydraulics for vegetable oil mills. Quality level DIN 51524 Part 2 HLP / DIN 51517 Part 3 CLP.
	ULTRATEF	H1	100	Multifunctional oil with PTFE for lubrication of open mechanisms in the food industry. NSF approved as H1 for accidental food contact.
	ULTRA BIO	100	100	Recommended for the lubrication of industrial gears, bearings, guides, chains, hydraulic circuits, pumps and circulation lubrication, in case of possible discharge of the lubricant into the environment.

GENERAL LUBRICANTS


Product			ISO VG Viscosity (CST at 40° C)	Description and applications
	ENGINE OIL	7 12	100 150	General lubricant for machinery and mechanisms bearing moderateloads at moderate speeds. Have high oiliness and thermal stability.

SPECIAL LUBRICANTS


Product		ISO VG Viscosity (CST at 40° C)	Description and applications
	ULTRA SP 2	2	Lubrication of high speed spindles operating at extremely close tolerances (“zero clearance”).
	ULTRA CS 200 H1	200	It is especially formulated for the lubrication of high-speed canning machine mechanisms. Due to its high stability and minimal residue formation, it ensures correct lubrication under the most demanding operating conditions. Applicable in machinery that presents a risk of contamination of the product with the lubricant.

GEARS OILS


Product			ISO VG Viscosity (CST at 40° C)	Description and applications
	STANDARD VAREN EP	100 150 220 320 460 680 1000	100 150 220 320 460 680 1000	Lubrication of industrial gearboxes. Meet the requirements of the standards: DIN 51 517 Part 3-CLP/ US STEEL 224 / AGMA 9005-D94.
	ULTRAGEAR EP	150 220 320 460 680	150 220 320 460 680	Oils with mineral base for gears operating in heavy duty load conditions. High protection against micropitting. They are approved by Siemens MD for use in Flender gears.

BIODEGRADABLE GEARS OILS


Product			ISO VG Viscosity (CST at 40° C)	Description and applications
	ULTRAGEAR BIO	460	460	Lubrication of industrial gears, bearings, slide ways, cams and other mechanisms requiring oil with EP properties, where there is a possibility of lubricant waste to the environment.

GEAR OILS FOR THE PRINTING INDUSTRY


Product			ISO VG Viscosity (CST at 40° C)	Description and applications
	ULTRAPRESS AG	5 LA 68 LA	68/68	Gear oils specially formulated to meet the requirements of printing machine manufacturers (MANROLAND, HEIDELBERG, etc).

SYNTHETIC GEAR OILS


Product			ISO VG Viscosity (CST at 40° C)	Description and applications
	ULTRAGEAR PG	100 150 220 320 460	100 150 220 320 460	Synthetic lubricants with high thermal stability and great lubricating power. For long life lubrication of all types of gears, circulation systems, bearings at high temperature (up to 200ºC).
	ULTRASYNT EP	150 220 320 460 680 1000	150 220 320 460 680 1000	Polyalphaolefin-based synthetic gear oils operating under severe load and temperature conditions. Approved by Siemens MD for use in Flender gears.
	ULTRASYNT FGT	150	150	Special synthetic oil for lubrication of bearings and gears under high loads in the food, beverage, pharmacy and cosmetic industries. Low coefficient of friction. Complies with standards: ISO 12925 - CKB, CKC, CKD / DIN 51517 Parts 1, 2 and 3 - C, CL and CLP. NSF certified as H1 - suitable for accidental food contact.
	ULTRASYNT WG	1000	1000	Is particularly suitable for the long-term lubrication of worm gears. Can be used in circulation systems for lubrication of plain and roller bearings and other mechanical components, especially at high temperatures.

SLIDEWAYS AND DRIP-FREE


Product			ISO VG Viscosity (CST at 40° C)	Description and applications
	STANDARD SLIP	68 100 150 220 320 1000	68 100 150 220 320 1000	Special oils for the lubrication of horizontal and vertical slideways and drip-free general lubrication.These oils contain unctuosity, adherence and extreme pressure (E.P.) additives. Quality level ISO 6743/4-L-HG / DIN 51524 - Part 2 - HLP / DIN 51517 - Part 3 - CLP.

CHAINS OILS


Product			ISO VG Viscosity (CST at 40° C)	Description and applications
	ULTRACHAIN HT	220 320	220 320	Synthetic lubricants for chains operating at temperatures up to 250ºC. High lubricating power. Residue-free.
	ULTRACHAIN PRO	150 270 460	150 270 460	Oils with synthetic bases for chains with working temperatures of 200-220ºC. Great stability to oxidation and residue formation.
	ULTRA CLT	320	320	Synthetic lubricant for chains operating from -30 up to 120ºC. Resistant to moisture, water and steam. High adherence. Chains, cables, cams, open mechanisms.
	STANDARD SINT	15	15	Biodegradable ester based synthetic chain oil. Operating temperature from -50 up to +180ºC. Suitable for operation in dusty conditions and where environment contamination is possible.
	STANDARD CLT	460	460	Mineral oil for chains and slide ways working up to +150ºC with high loads and moisture. Quality level ISO 6743/4 – category L-HG / DIN 51517 – CLP
	ULTRACHAIN CPO	270	270	Ester based synthetic oil for chain lubrication with operating temperature up to +250ºC. Compatible with some paints used in cataphoresis.
	ULTRACHAIN FG	220	220	Ester based synthetic oil for chain lubrication with operating temperature up to +250ºC. Certified by NSF as H1 – suitable for accidental food contact.
	ULTRADRY	320	320	Dispersion of micronized graphite in a synthetic fluid for the lubrication of chains, bearings, sliding surfaces, support rings, etc. at temperatures up to 450ºC (600ºC with sufficient relubrication).
	ULTRACHAIN CTP 145		135	Special synthetic oil for lubricating chains in overhead and ground conveyors of cataphoretic paint lines. ULTRACHAIN CTP 145 is compatible with most water soluble paints and prevents the formation of craters, "fish eyes" and other surface defects. Working temperature up to 200ºC.
	ULTRALUBE P-6		32	Synthetic base oil for lubricating chains, guides, cams and other open mechanisms at low temperatures (down to -50ºC). Prevents the formation of crystals at low temperatures that can be projected on processed foods. Approved by NSF as H1 for accidental food contact.

COMPRESSORS AND PUMPS


Product			ISO VG Viscosity (CST at 40° C)	Description and applications
	STANDARD CP	46 68 100 150	46 68 100 150	Mineral oils for air compressors with specific additives. High stability to oxidation, preventing the formation of deposits. Comply with the standard DIN 51 506. Category VD-L.
	STICK PRESS AG	23	320	Special oil for vacuum and pressure pumps in the Printing Industry. Complies with standard DIN 51 506 / VB-L / VC-L / VD-L.
	STANDARD FRI	68	68	Mineral naphthenic oil for the lubrication of refrigerating compressors of ammonia, freons R12 and R22, and propane-butane. Complies with DIN 51503 KAA/KC/KE.
	ULTRABAR HC	46	46	Special hydrocarbon based oils for lubricating screw and vane compressors under severe operating conditions. Quality level: ISO 6743/3 - DAH / DIN 51 506 - VD-L.
	ULTRABAR HS	46 68	46 / 68	PAO synthetic base oils for long-term lubrication of screw and vane compressors under severe operating conditions. Quality level: ISO 6743/3 - DAJ / DIN 51 506 - VD-L.

NEBULIZABLE OILS


Product			ISO VG Viscosity (CST at 40° C)	Description and applications
	NEBULOIL	2	22	Highly refined oil with special additives for optimum pulverization. Recommended by FESTO.

SPECIAL HYDRAULICS FOR INDUSTRY


Product			ISO VG Viscosity (CST at 40° C)	Description and applications
	PRESOL HM	32 46 68 100 150	32 46 68 100 150	High performance hydraulic oils with anti-wear, corrosion protection, anti-oxydation and anti-foam additives. Demulsifying. Meet DIN 51 524 Part 2 standard and equivalent.
	PRESOL TH EP	3 4 5 8	32 46 68 100	High performance hydraulic oils with anti-wear, corrosion protection, anti-oxydation and anti-foam additives. Demulsifying, ash-free, red colour. Meet DIN 51 524 Part 2 standard and equivalent.
	PRESOL HV	15 32 46 68 100	15 32 46 68 100	High performance hydraulic oils featuring high viscosity index, with anti-wear, corrosion protection, anti-oxydation and anti-foam additives. Demulsifying. Meet DIN 51 524 Part 3 standard and equivalent.
	PRESOL HV PLUS	22 46 68	22 46 68	Refined and microfiltered hydraulic oil, specially formulated for use in systems subject to large temperature variations, due to its very high viscosity index, and where special anti-wear and extreme pressure characteristics are required, great resistance to corrosion and stability to oxidation. Complies with specifications: ISO 6074 (HV) DIN 51524, Part 2 and 3 (HVI) MIL-L-24459.
	PRESOL HFC	40	46	Fire resistant water-glycol type hydraulic fluid, featuring red colour and high lubrication and stability.
	ULTRAPRESS SC HM	46 68	46 68	High performance hydraulic oils with anti-wear, corrosion protection, anti-oxydation and anti-foam additives. Demulsifying, ash-free. Meet DIN 51 524 Part 2 standard and equivalent.
	ULTRAPRESS SC HV	46 68	46 68	Highly refined and micro-filtered hydraulic oil, for use in systems exposed to wide temperature variation, and where requirements of anti-wear capacity, oxidation and corrosion protection are demanding. The product is ashless and free from heavy metals, it has low foam tendency and good deairation and demulsifying capacity.
	ULTRAPRESS SCD	46	46	High performance hydraulic oil with anti-wear, corrosion protection, anti-oxydation and anti-foam additives. Detergent, ash-free. Meets DIN 51 524 Part 2 standard and equivalent.
	PRESOL HE FR	46 68	46 68	Biodegradable fire resistant hydraulic fluid. is based on a high flash point biodegradable TMP ester and additives.
	ULTRAPRESS HEES	46 150	46 150	Recommended for hydraulic equipment operating in conditions where there may be a risk of incidental spillage or contamination of the environment, such as wind installations, hydroelectric plants, ports, ski resorts, etc. It is also suitable as a fire resistant hydraulic fluid. Working temperatures: from -30 ºC to 90 ºC (with point peaks of +120 ºC).
	ULTRAPRESS SC 46 SL	46	46	Refined and "ashless" microfiltered hydraulic oil for systems where oils with high degrees of cleanliness, anti-wear characteristics, oxidation stability and corrosion resistance are required.
	ULTRAPRESS SC 46 KM	46	46	Refined and "ashless" microfiltered hydraulic oil for systems where oils with high degrees of cleanliness, anti-wear characteristics, good air separation behaviour, oxidation stability and corrosion resistance are required.

TECHNICAL OIL


Product			ISO VG Viscosity (CST at 40° C)	Description and applications
	SIVANO	1 6	22 1	Technical oils for use as plasticizers and auxiliaries in chemical formulations.
	WHITE SI		220	Silicone oil with high thermal stability for the lubrication of mechanisms at temperatures from -30 to 200ºC, and as an auxiliary in spinning.

MEDICINAL OILS


Product			ISO VG Viscosity (CST at 40° C)	Description and applications
	FARMOL	22 33 55	15 32 68	Medicinal-grade white oils suitable as lubricants and auxiliary products in food processing, cosmetics and pharmaceuticals, etc. DAB 10 and FDA 178.3620 (a) quality level. Certified by NSF as 3H - suitable for direct contact with food.
	FARMOL NL		22	White medicinal oil with the same uses as Farmol 22 but not classified as dangerous by aspiration, thanks to its viscosity greater than 20.5 mm2/s.
	ULTRAFARM	40	40	Medicinal white oil stabilized with antioxidant, special for dough dividers in bread industry, as a release agent and auxiliary product. Quality level FDA 178.3620 (a), FDA 172.878. Certified by NSF as 3H - suitable for direct contact with food.
	ULTRAFARM	VDP-E	32	Vegetable oil with additives, especially for divider-weighers in industrial bakeries. High resistance to heat and oxidation. Certified by NSF as 3H - suitable for direct contact with food.
	ULTRASIL CUT	300	1	Food grade emulsion of silicone for lubrication and refrigeration in low severity metalworking operations.
	WHITE OIL FILANTE		-	Solid petroleum jelly of medicinal quality indicated for cosmetic and medicinal uses, and as a lubricant in the food industry. DAB 10 and FDA 178.3620 (a) quality level.

HEAT TRANSFER FLUIDS


Product			ISO VG Viscosity (CST at 40° C)	Description and applications
	ACEITE TERMICO	3	22	Synthetic thermal fluid for closed circuits. Operating temperature from -20 to + 315ºC.
	ULTRATERMIC P	6	32	Synthetic based thermal fluid for closed circuits where a food grade product is required. Working temperature up to 315ºC. NSF H1 and HT1 certifications.

SPECIAL OILS


Product			ISO VG Viscosity (CST at 40° C)	Description and applications
	ULTRA PFPE	150 220 460	150 / 220 / 460	Synthetic oils with perfluoropolyether base for Lubrication in extreme conditions, presence of aggressive chemical products, high temperatures and lubrication for life.
	ULTRASYNT PG	68	68	Synthetic oil auxiliary lubricant in manufacturing processes of copper and aluminium wires.
	ULTRASYNT IF	40	32	Special synthetic oil for lubricating sintered bearings. Very wide working temperature range: -60 to + 150ºC.

CLT, STANDARD SINT, STANDARD CLT, ULTRACHAIN CPO, ULTRACHAIN FG, ULTRATEF, ULTRADRY, ULTRACHAIN CTP 145, ULTRALUBE P-6, STANDARD CP, ULTRA BIO, STICK PRESS AG, STANDARD FRI, ULTRABAR HC, ULTRABAR HS, NEBULOIL, PRESOL HM ,PRESOL TH EP, PRESOL HV, PRESOL HV PLUS, PRESOL HFC, ULTRAPRESS SC HM, ENGINE OIL, ULTRA SP 2, ULTRAPRESS SC HV, ULTRAPRESS SCD, PRESOL HE FR, ULTRAPRESS HEES, ULTRAPRESS SC 46 SL, ULTRAPRESS SC 46 KM, SIVANO, WHITE SI, FARMOL, ULTRAFARM, ULTRA CS 200 H1, STANDARD VAREN EP, ULTRAGEAR EP, ULTRAGEAR BIO, ULTRAPRESS AG, ULTRAFARM, ULTRASIL CUT, WHITE OIL FILANTE, ACEITE TERMICO, ULTRATERMIC P, ULTRA PFPE, ULTRASYNT PG, ULTRASYNT IF